







Water pooling near a foundation is one of those problems you can't just patch over. It doesn't fix itself, and every season it sits there, the risk to the structure underneath gets worse. That's exactly the situation we walked into on this job in Box Elder - a patio that wasn't draining correctly and had already caused enough concern that the homeowner needed it completely redone before moving forward with their deck build.
To make things more complicated, others had already taken a crack at this one and couldn't get it right. So we started from scratch. We broke out the old concrete, cleared the debris, and got down to the subgrade to see what we were actually working with. The rebar and busted concrete chunks you're seeing tell the story of what we pulled out - it was a mess underneath, and there's no shortcut around that kind of problem.
Once the old slab was out, we regraded the base the right way. Proper slope, proper compaction. We also added reinforcement before the pour so the new slab would hold up long-term. Skipping those steps is exactly how you end up with a patio that pools water and starts shifting after a couple of winters. We don't cut corners on prep - it's where the job is either won or lost.
The finished pour came out clean and flat, with the grade working away from the foundation the way it should. Now this homeowner has a solid base that's actually ready to support the deck project they've been planning. That's the whole point - concrete work that sets up everything else to go smoothly.
This is what we mean when we talk about doing concrete demolition and removal the right way before pouring new. You can't just lay concrete over a bad situation and hope it holds. Whether it's a patio, a walkway, or a slab near your foundation, the prep underneath is everything. We take that seriously on every job.